The Call We Get Most Often
A homeowner presses the remote and nothing happens, or the door only lifts a few inches before stalling. Sometimes there's a loud bang from the garage earlier that morning — that's usually the spring letting go. On a typical visit, a technician finds one snapped torsion spring above the door, sometimes two if the system is older, and often some surface rust on the coils from the salt air and humidity that's constant this close to the coast. The door itself is usually fine. It's the spring doing all the lifting work, and once it's gone, the opener can't make up the difference.
What Spring Replacement Typically Costs
These are national ranges, not quotes for any specific job — your price depends on the factors below.
- Single torsion spring replacement: roughly $150–$350, parts and labor combined.
- Two torsion springs (common on heavier doors): roughly $250–$550.
- Extension springs (the kind that run along the horizontal tracks): roughly $100–$300 depending on how many are replaced.
- High-cycle or heavy-duty springs built for frequent use or larger doors: add $50–$150 to the above ranges.
Most standard single-door jobs land somewhere in the middle of these ranges. Double-wide garage doors, which are common on newer South Florida homes, tend to sit at the higher end because they need stronger springs to handle the extra weight.
Factors That Move the Price Up or Down
Door weight and size
A heavier door — solid wood, insulated steel, or anything oversized — needs a spring rated for more weight, which costs more and may require two springs instead of one.
Spring type and quality
Standard-duty springs cost less upfront but wear out faster. High-cycle springs cost more initially but hold up better, which matters here given how often garage doors in this area get used to beat the afternoon heat or dodge a downpour.
How many springs are failing
If one spring just snapped, the other one (on a two-spring system) is usually close behind, since they wear at roughly the same rate. Many technicians recommend replacing both at once rather than paying for a second service call a few months later.
Corrosion and hardware condition
Salt air speeds up rust on springs, cables, and end bearing plates. If corrosion has spread beyond the spring itself, the job may include replacing cables or bearings too, which adds to the total.
Same-day or emergency service
A spring that breaks on a Saturday evening, or right before a tropical system is expected, often costs more to fix same-day than a scheduled weekday appointment.
What a Proper Quote Should Include
A clear, trustworthy quote should spell out:
- The spring type and size being installed, and why it matches your door's weight
- Whether one or both springs are being replaced
- Labor cost separate from parts cost
- Whether cables, pulleys, or bearing plates are inspected and included if worn
- A warranty on both the parts and the labor
If a quote is just one lump number with no breakdown, ask for specifics before agreeing to the work. Springs are under serious tension, and the parts matter as much as the labor.
When to Call Deerfield Beach Garage Door Pro
If your door won't open, makes a loud pop, or feels heavier than usual when lifted by hand, don't try to inspect or replace the spring yourself — the tension involved makes this one of the few garage door repairs best left to a trained technician every time. We handle Garage Door Spring Repair for homes and businesses throughout Deerfield Beach and nearby communities, and while we're there, we'll check cables, rollers, and hardware for the rust and wear that salt air and humidity tend to cause over time. If your opener is straining or your springs are original to an older door, our Garage Door Maintenance & Tune-Up service catches these issues before they turn into a Saturday-night emergency.
If your garage door won't budge or you just heard that telltale bang, call Deerfield Beach Garage Door Pro today. We serve Deerfield Beach, FL and the surrounding area, and we'll get your door safely back in service.